comp.os.linux.networking

Here is my output when starting wlan0 using "rc.inet1 wlan0_restart"
with wpa_supplicant using the -ddd option.

I use ctrl+c when PINGing other wise it would go for ~ a minute.
"Failed to connect ..." would continue until I hit ^+c.

The first thing I see wrong is the following:
PSK (ASCII passphrase) - hexdump_ascii(len=10): [REMOVED]
PSK (from passphrase) - hexdump(len=32): [REMOVED]

I will also post my iwconfig output but it says "Encryption key:off"
at one point.

chris


Error for wireless request "Set Nickname" (8B1C) :
SET failed on device wlan0 ; Operation not supported.
rc.wireless: wpa_supplicant
Initializing interface 'wlan0' conf '/etc/wpa_supplicant.conf' driver
'wext' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/
wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
ctrl_interface_group='0' (DEPRECATED)
eapol_version=1
ap_scan=2
fast_reauth=1
Line: 19 - start of a new network block
scan_ssid=1 (0x1)
ssid - hexdump_ascii(len=4):
6f 68 6d 79 ohmy
proto: 0x1
key_mgmt: 0x2
pairwise: 0x8
group: 0x8
PSK (ASCII passphrase) - hexdump_ascii(len=10): [REMOVED]
PSK (from passphrase) - hexdump(len=32): [REMOVED]
Line: 45 - start of a new network block
ssid - hexdump_ascii(len=3):
61 6e 79 any
key_mgmt: 0x4
priority=2 (0x2)
Priority group 2
id=1 ssid='any'
Priority group 0
id=0 ssid='ohmy'
Initializing interface (2) 'wlan0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf
capabilities: key_mgmt 0xf enc 0xf
WEXT: Operstate: linkmode=1, operstate=5
Own MAC address: 00:90:4b:c4:2a:3c
wpa_driver_wext_set_wpa
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_countermeasures
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 4 value 0x0 - wpa_driver_wext_set_drop_unencrypted
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 5 value 0x1 - Setting scan request: 0 sec 100000 usec
ctrl_interface_group=0
Added interface wlan0
RTM_NEWLINK: operstate=0 ifi_flags=0x1002 ()
Wireless event: cmd=0x8b06 len=8
Ignore event for foreign ifindex 2
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
State: DISCONNECTED -> SCANNING
Trying to associate with SSID 'ohmy'
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: No WPA/RSN IE available from association info
WPA: Set cipher suites based on configuration
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2 proto 1
WPA: clearing AP WPA IE
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00
00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_wext_set_drop_unencrypted
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 5 value 0x1 - State: SCANNING -> ASSOCIATING
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_wext_associate
Setting authentication timeout: 60 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b1a len=12
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b19 len=8
Scan results did not fit - trying larger buffer (8192 bytes)
Received 4836 bytes of scan results (23 BSSes)
Scan results: 23
Authentication with 00:00:00:00:00:00 timed out.
Added BSSID 00:00:00:00:00:00 into blacklist
State: ASSOCIATING -> DISCONNECTED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Trying to associate with SSID 'any'
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: clearing AP WPA IE
WPA: clearing AP RSN IE
WPA: clearing own WPA/RSN IE
No keys have been configured - skip key clearing
wpa_driver_wext_set_drop_unencrypted
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 5 value 0x0 - State: SCANNING -> ASSOCIATING
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_wext_associate
Setting authentication timeout: 60 sec 0 usec
EAPOL: External notification - portControl=ForceAuthorized
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b1a len=11
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b19 len=8
Received 3932 bytes of scan results (19 BSSes)
Scan results: 19
CTRL_IFACE monitor attached - hexdump(len=21): 2f 74 6d 70 2f 77 70 61
5f 63 74 72 6c 5f 33 36 30 39 2d 30 00
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=6):
53 54 41 54 55 53 STATUS
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
RX ctrl_iface - hexdump_ascii(len=4):
50 49 4e 47 PING
CTRL-EVENT-TERMINATING - signal 2 received
CTRL_IFACE monitor send - hexdump(len=21): 2f 74 6d 70 2f 77 70 61 5f
63 74 72 6c 5f 33 36 30 39 2d 30 00
Removing interface wlan0
State: ASSOCIATING -> DISCONNECTED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_wext_set_wpa
wpa_driver_wext_set_drop_unencrypted
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 5 value 0x0 - wpa_driver_wext_set_countermeasures
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 4 value 0x0 - No keys have been configured - skip key
clearing
CTRL_IFACE wait for attached monitors to receive messages
Removed BSSID 00:00:00:00:00:00 from blacklist (clear)
Cancelling scan request
Cancelling authentication timeout
WEXT: Operstate: linkmode=0, operstate=6
rc.wireless: begin sleep
rc.wireless: done sleep
Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or
directory
Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or
directory
Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or
directory
Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or
directory
Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or
directory
Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or
directory