linux.debian.user.french

Remis sur la liste (eh oui, on r=C3=A9pond =C3=A0 la liste, et seulement =
=C3=A0
la liste).

Mark Free, lundi 3 mars 2008, 17:03:13 CET
>[=E2=80=A6]=20
> Bonjour,

=E2=80=99soir,

> D=C3=A9sol=C3=A9 du silence mais le WE fut charg=C3=A9.

Ben, c=E2=80=99est toi qui a le probl=C3=A8me, hein :o)

> > V=C3=A9rifie la sortie de dmesg (dmesg > sortie.txt pour l=E2=80=99av=
oir
> > dans un fichier) : ton disque est sans doute maintenant reconnu
> > comme /dev/sda et non plus /dev/hda.
> >=20
> > Si c=E2=80=99est bien le cas, il suffit de remplacer hda1 par sda1
> > dans /etc/fstab.
> > Sinon, poste-nous ton dmesg.
>=20
> Le voili:
>[=E2=80=A6]=20
> sd 2:0:0:0: Attached scsi removable disk sda
> sd 2:0:0:1: Attached scsi removable disk sdb
> sd 2:0:0:2: Attached scsi removable disk sdc
> sd 2:0:0:3: Attached scsi removable disk sdd
> sd 2:0:0:4: Attached scsi removable disk sde
> sd 3:0:0:0: Attached scsi removable disk sdf

Bon, d=C3=A9j=C3=A0, ton lecteur de cartes prend sda =C3=A0 sdf.

>[=E2=80=A6]
> scsi 0:0:0:0: Direct-Access ATA Maxtor 6L250R0 BAH4 PQ: 0 ANSI=
: 5
> SCSI device sdg: 490234752 512-byte hdwr sectors (251000 MB)

Et voil=C3=A0 le premier disque dur=E2=80=A6

> sdg: Write Protect is off
> sdg: Mode Sense: 00 3a 00 00
> SCSI device sdg: write cache: enabled, read cache: enabled, doesn't=20
> support DPO or FUA
> SCSI device sdg: 490234752 512-byte hdwr sectors (251000 MB)
> sdg: Write Protect is off
> sdg: Mode Sense: 00 3a 00 00
> SCSI device sdg: write cache: enabled, read cache: enabled, doesn't=20
> support DPO or FUA
> sdg: sdg1 sdg2 < sdg5 >
> sd 0:0:0:0: Attached scsi disk sdg

=E2=80=A6qui est en /dev/sdg.

Ton /boot est donc en /dev/sdg1.
Voil=C3=A0, il suffit de mettre /dev/sdg1 =C3=A0 la place de /dev/hda1
dans /etc/fstab.

> scsi 0:0:1:0: Direct-Access ATA IC35L120AVV207-0 V24O PQ: 0 ANSI=
: 5
> SCSI device sdh: 241254720 512-byte hdwr sectors (123522 MB)

Hop, le second DD (123=C2=A0Go)=E2=80=A6

> sdh: Write Protect is off
> sdh: Mode Sense: 00 3a 00 00
> SCSI device sdh: write cache: enabled, read cache: enabled, doesn't=20
> support DPO or FUA
> SCSI device sdh: 241254720 512-byte hdwr sectors (123522 MB)
> sdh: Write Protect is off
> sdh: Mode Sense: 00 3a 00 00
> SCSI device sdh: write cache: enabled, read cache: enabled, doesn't=20
> support DPO or FUA
> sdh: sdh1 sdh2 < sdh5 >
> sd 0:0:1:0: Attached scsi disk sdh

=E2=80=A6en sdh.

> scsi 1:0:0:0: CD-ROM ASUS DVD-ROM E616 Z.0 PQ: 0 ANSI=
: 5
> sr0: scsi3-mmc drive: 6x/48x cd/rw xa/form2 cdda tray

Et le cd-rom=E2=80=A6

> Uniform CD-ROM driver Revision: 3.20
> sr 1:0:0:0: Attached scsi CD-ROM sr0
> sd 2:0:0:0: Attached scsi generic sg0 type 0
> sd 2:0:0:1: Attached scsi generic sg1 type 0
> sd 2:0:0:2: Attached scsi generic sg2 type 0
> sd 2:0:0:3: Attached scsi generic sg3 type 0
> sd 2:0:0:4: Attached scsi generic sg4 type 0
> sd 3:0:0:0: Attached scsi generic sg5 type 0
> sd 0:0:0:0: Attached scsi generic sg6 type 0
> sd 0:0:1:0: Attached scsi generic sg7 type 0
> sr 1:0:0:0: Attached scsi generic sg8 type 5

=E2=80=A6en sr0, sg#

>[=E2=80=A6 encore deux trois trucs (carte SD en sdi=E2=80=A6) =E2=80=A6]

--=20
Sylvain Sauvage