linux.gentoo.user

--0-1729091561-1205669509=:98019
Content-Type: text/plain; charset=us-ascii

Update on this matter.

-issued the command:

wpa_supplicant -iwlan0 -Dwext -d -c /etc/wpa_supplicant/wpa_supplicant.conf
-then

dhcpcd wlan0
Then everything is ok and my wireless works.

My question is why when I issue /etc/init.d/net.wlan0 start it says about the WEP and doesn't connect?

Thank you.[/code]

----- Forwarded Message ----
From: Dani Crisan
To: gentoo-user@lists.gentoo.org
Sent: Sunday, March 16, 2008 10:41:28 AM
Subject: [gentoo-user] wireless not working

Hello,

Here is the scenario:
-wireless card: Intel PRO/WIRELESS 3945ABG
-lsmod | grep 3945
iwl3945 144628 0
mac80211 108932 1
iwl3945
-iwlist
wlan0 Scan completed :
Cell 01 - Address: 00:17:9A:F4:CE:B5
ESSID:"a"
Mode:Master
Channel:6
Frequency:2.437 GHz (Channel 6)
Quality=33/100 Signal level=-89 dBm Noise level=-127 dBm
Encryption key:off
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Extra:tsf=00000085815e4183
Cell 02 - Address: 00:1D:7E:E3:8C:DD
ESSID:"baladei-wifi"
Mode:Master
Channel:11

Frequency:2.462 GHz (Channel 11)
Quality=97/100 Signal level=-28 dBm Noise level=-127 dBm
Encryption key:on
IE: WPA Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
24 Mb/s; 36
Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s
12 Mb/s; 48 Mb/s
Extra:tsf=0000000b865b4049

(I WANT TO CONNECT TO CELL2-baladei-wifi)


-cat /etc/wpa_supplicant/wpa_supplicant.conf

ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=wheel
update_config=0
fast_reauth=1

network={
ssid="baladei-wifi"
proto=WPA
key_mgmt=WPA-PSK
pairwise=CCMP TKIP
group=CCMP TKIP WEP
psk="my-password"
priority=5
}

-cat /etc/conf.d/net
modules_wlan0=("dhcpcd" "iwconfig")

wpa_supplicant_wlan0="-Dwext -c /etc/wpa_supplicant/wpa_supplicant.conf"
config_wlan0=("dhcp")
dhcpcd_wlan0="-t 5 -A"

pre-up(){
ifconfig wlan0 up
}

-and the error:
/etc/init.d/net.wlan0 start
* Starting
wlan0
* Configuring wireless network for wlan0
* WEP key is not set for "baladei-wifi" - not connecting
* WEP key is not set for "linksys" - not connecting
* Couldn't associate with any access points on wlan0
* Failed to configure wireless for wlan0 [ !! ]



I need to connect to my linksys WRT54GL which is set to wpa-personal / wpa algorithm: TKIP, no WEP.



Please advise since I'm getting very confused.


Thank you in advance.







Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now.





____________________________________________________________________________________
Looking for last minute shopping deals?
Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping
--0-1729091561-1205669509=:98019
Content-Type: text/html; charset=us-ascii